| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Top for traditionally prepared sides http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=4044 |
Page 1 of 1 |
| Author: | Brock Poling [ Fri Dec 09, 2005 7:02 am ] |
| Post subject: | |
I do this. Glue up all the braces in the dish with the exception of the trasverse brace and the popsicle stick brace (neither of these braces are radiused... they are flat). Then glue those top two braces up from a flat surface. This is how I learned to do it from Frank Finocchio. It works like a charm. |
|
| Author: | Michael Dale Payne [ Fri Dec 09, 2005 7:08 am ] |
| Post subject: | |
Like Brock. This makes the upper bout area decend into a flat plane for the fretboard with little or no sanding required to mate up |
|
| Author: | Shane Neifer [ Fri Dec 09, 2005 10:28 am ] |
| Post subject: | |
SO then, how do you transition the rim from the arch to the flat area? Especially over the headblock. Thanks Shane |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|